Complete Asset Inventory Management for Continuous Visibility Across OT Environments

Versatile Software Sensors designed for OT environments.

Close the asset visibility gap across all your facilities.

Do more with the tools you already have in place.

SynSaber's software visually categorizes and analyzes OT assets for complete Asset inventory and insights

Centralized Asset Inventory Management with Context for Your OT Environment, at Scale

Every OT environment is uniquely built to meet a specific purpose, making a one-size-fits-all approach impractical.

SynSaber’s flexible, software-based Sabers (sensors) integrate seamlessly into any part of your network whether it’s a factory floor, remote substation, or anywhere you have assets in an industrial setting.

We utilize multiple identification techniques to gather relevant asset data and contextual information without disrupting operations.

Data from Everywhere,
to Anywhere

Step 1: Deploying Sabers for Targeted Visibility
Step 2: Flexible, Comprehensive Data Collection
Step 3: Data Distribution and Visualization

Install SynSaber’s lightweight software sensors (Sabers) anywhere you need visibility, from the factory floor and crucial operational plants to the most remote locations with limited connectivity.

Sabers identify information such as protocols, remote access, and more for true visibility into your network.

Configure Sabers to collect and process data to support specific use cases including asset discovery and identification, insights into network communications, and remote protocol detection.

Sabers curate information and send it wherever it’s needed most.

Record full data captures to disk, visualize results in the Saber interface, or seamlessly transmit it to your existing tools such as SIEMs, datalakes, historians, and other components of your OT environment, empowering teams across your organization.

The SynSaber Advantage

Elevate industrial operations with seamless integrations and superior scalability to enhance asset visibility and provide access to the data your teams need.

Developed for OT Environments

SynSaber is purpose-built for OT environments, aligning with the complexity and careful planning of each industrial environment.

Work with Existing Tools

Do more without adding another tool to the roster. Sabers send data from anywhere in your environment to anywhere you need it.

See & Process Quickly on Any Network

Sabers process data at the edge before it leaves your network, so teams get what they need without the noise.

Scale to Fit Your Needs

Deploy as many or as few Sabers as you need to reduce blind spots and gather the data that empowers your team.


What Clients are Saying

Mark Weatherford, CSO (AlertEnterprise); Chief Strategy Officer (National Cybersecurity Center)

“SynSaber is taking a unique approach to industrial control system security that isn’t just another security feature in the increasingly crowded landscape of security products.”

Senior Analyst, Large Energy Utility

“We need a simple/fast way to enable OT monitoring in specific sites and are looking to SynSaber to enable us to add visibility and monitoring to locations when we don’t have the time and resources to plan and implement complex changes.”

Senior Analyst, Large Energy Utility

“Many facilities have critical networks out in remote locations away from the control room and operators, and we frequently don’t have extra fiber available to use in those locations that would typically be required for other solutions. With SynSaber, we hope to deploy a small device that will enable monitoring of those remote locations.”

Request a Demo

SynSaber is the simple, effective, low-hardware, low-hassle industrial asset and network monitoring solution. Request a demo to see how we can help you overcome whatever threats lie ahead.

Frequently Asked Questions

What is Asset Visibility, and why is it important?

Asset visibility is the first step in understanding your environment; it is the process of identifying and maintaining an updated list of the assets connected at each facility — even remote sites — along with any associated metadata. This metadata can include information such as the type of device (HMI, PLC, router), its classification (OT/IT), the protocols it uses, vendor, serial number, model, and firmware. It can also include extended details such as software installed on the device or installed hardware modules.

How does SynSaber provide asset visibility in OT environments?

Sabers can be deployed at any level of your environment to begin gathering relevant asset data based on activity in the network. Using both open-source and proprietary resources and databases, Sabers can identify assets and metadata based on information that is being communicated across the network without disruption to the environment or any required action from operators, analysts, or other team members.

What types of assets can SynSaber’s solution identify and monitor?

SynSaber can identify any IT and OT assets connected and communicating across a network. If it has an active presence on the network, we can see it.

How does SynSaber handle compatibility with legacy systems or older industrial equipment?

Sabers are able to identify assets as long as they communicate on a network. Our solution is purpose-built for OT environments and includes support for many less common or legacy industrial protocols. We also understand that every facility is uniquely constructed to meet a specific operation purpose. Our sensor is designed to integrate seamlessly into these networks to gather asset data and monitor activity without impacting sensitive assets or the network itself.

How long after I put SynSaber in place before I start seeing results?

As soon as you install a Saber and configure where you want the data to go, results can be seen almost immediately. The Saber will begin to extract asset information as soon as it sees packets on the network where it is deployed. If using the Saber’s local UI, you can view asset data as it is captured. Depending on your Saber’s data pipeline configuration, you will also start seeing asset information in your other configured data destinations such as a SIEM, SOAR, data lake, or CMDB.

Our organization currently uses a variety of hardware and software platforms, and we‘re concerned that integrating a new solution might be difficult and costly. How can SynSaber’s approach help us address these concerns?

We believe that you should be able to send your network data anywhere you need to; our solution was built with the principle of integration-first. No two OT environments are architected and deployed the same way, so we work with your teams to understand your visibility goals, what you already have in place, and work to create a deployment plan that best suits your needs. Our Sabers capture data from your network and can send it anywhere you need in your environment, whether that’s a Historian, datalake, or any of the existing tools that any of your teams currently use.

Deploying SynSaber is as easy as identifying the sites or network areas where you need additional visibility and installing a sensor there. We’re flexible enough to sideload on an existing machine, run in a virtualized container, or direct install on a small piece of dedicated hardware such as a ruggedized industrial computer.

How often does my OT asset data get updated?

Sabers constantly monitor your network environment. This means we are able to detect and update asset data automatically in near real-time. There is no need to schedule updates.

How easily can SynSaber integrate into my existing systems?

Deploying a Saber can be done within a span of hours, rather than weeks or months. All you need is a place on the network for the Saber to be deployed (virtualized machine, side-loaded on existing hardware, etc.), defined destinations for the Saber to send data, and you’ll starting seeing what the Saber sees right away.

Is SynSaber right for my organization?

SynSaber is right for any organization with industrial, OT environments. From advanced manufacturing with factory floors in different nations to critical infrastructure such as water treatment and electricity, we are dedicated to closing the visibility gap in industrial environments. Whether you have thousands of assets across multiple sites or a dozen assets in a handful of substations, we can help you on your visibility journey.

What do I need in addition to the software to make SynSaber’s Sabers work?

All a Saber needs for deployment is available compute resources. Sabers can be sideloaded on existing machines, deployed on a virtualized machine, or installed onto the network with a small piece of hardware. The number of required resources depends on the amount of data being processed at each network and how frequently any updates or changes need to be sent out.

Can SynSaber‘s solution be scaled up according to the organization’s needs?

Yes! Scale the number of Sabers you need as you need them. Start with the most critical parts of your environment and deploy additional Sabers as needed to grow your visibility alongside your networks.

I have thousands of devices all over the world. Can SynSaber monitor that?

Yes. Sabers can detect any asset on the network it lives on; there is no limit to the number of assets a Saber can detect in a given network. As long as each asset is communicating on a network with an active Saber, they will be identified and monitored. If you have devices across the world with Sabers at each location, the Circle provides a centralized view of all your organization’s assets.

Can SynSaber support a fully isolated or air-gapped environment with highly restrictive security policies?

Yes. Sabers are able to monitor network traffic and extract asset information and metadata without any external network connection. We are also well-suited to limited connectivity environments such as remote sites with 3G or satellite uplinks.